loading

Is specialized in designing, manufacturing for power transformers ,furnace transformers and reactor.

Current Situation of MMS Anti-theft Alarm System for Power Transformer

The current situation of power transformer MMS anti-theft alarm system and the supply of power, especially the safe and reliable supply of power, have always been the focus of society, enterprises, people and the media. Because a safe, stable and reliable power supply is related to the development of the national economy, the construction of a harmonious society and the vital interests of the people. Power grid security has become a sharp sword hanging over power enterprises.Overview

Current Situation of MMS Anti-theft Alarm System for Power Transformer 1

According to statistics, in the first two quarters of 2005, there were more than 550 cases of theft and destruction of power facilities in the system of Sichuan electric power company, with a direct economic loss of more than 2.6 million yuan. According to conservative estimates, in recent years, the direct economic losses caused by the theft of power facilities alone have exceeded 200 million yuan. Power grid security has become a sharp sword hanging over power enterprises. The supply of electricity, especially the safe and reliable supply of electricity, has always been the focus of attention of society, enterprises, people and the media. Because a safe, stable and reliable power supply is related to the development of the national economy, the construction of a harmonious society and the vital interests of the people.

According to the survey, the current maintenance, management and anti-theft of power facilities are summarized as follows:1. Most transformers and other power facilities are located outdoors and scattered in streets, urban-rural fringe, rural areas and other places, which brings a lot of trouble to the safety management of transformers.2. It is impossible for the power department to assign a large number of manpower to monitor each transformer in real time in an artificial way to prevent the equipment from being stolen or damaged.

3. In China, some provinces have also used methods such as infrared, limited distance wireless communication and physical anti-theft card to solve the anti-theft problem of transformer. However, due to the limitations of the principle of these systems or products, false alarm, weak anti-interference ability, and unable to receive the alarm signal in time, resulting in a large waste of human, material and financial resources. At the same time, the wireless transmission mode has high power (energy consumption) and needs to be approved by the management committee, which also has certain restrictions on the promotion of the system and products.

To sum up, the theft of power lines and transformers is relatively serious, and the relevant state departments attach great importance to it. Civil air defense plus technical defense is the most effective method. According to the actual situation, our company has developed a power transformer MMS anti-theft alarm system. This system is mainly used for power transformer anti-theft alarm. Its characteristics are: not limited by distance, quantity and climate. It has the characteristics of practical function, excellent quality and stable and reliable operation. It is suitable for various outdoor environments. It is widely used in the safety protection of all outdoor working equipment such as electric power, petroleum, base station and mine. It is the most advanced MMS alarm system among similar products in China.

Current Situation of MMS Anti-theft Alarm System for Power Transformer 2

GET IN TOUCH WITH Us
recommended articles
Case News
1 What are the advantages and disadvantages of machine winding and manual winding in the manufacture of transformer?The advantages of machine wound transformer are h...
Transformer winding machine is a special equipment used to wind transformer coils. In the process of transformer coil production, winding equipment is divided accord...
Comparison of power transformers:1 What are the advantages and disadvantages of machine winding and manual winding in the manufacture of transformer?The advantages o...
Working principle of power transformerAs for the power transformer, it is a special transformer whose output and input share a set of coils. The step-up and step-dow...
Introduction to working principle of power transformerThe high-voltage winding used in domestic transformers is generally connected into Y connection method, and the...
Operation principle of power transformer1. Operating temperature of transformerDuring the operation of the transformer, copper loss and iron loss will be generated, ...
Inspection during operation of power transformer(1) The on-site meter indication of the upper oil temperature and high and low winding temperature of the transformer...
Maintenance technology of on load tap changer of power transformer1 basic principle and structure of on load tap changer on load tap changer is an electrical device ...
1. Basic working principle of gas protectionWhen a fault occurs inside the power transformer oil tank (including the grounding short circuit through arc resistance c...
Switching power transformer is a power transformer with switch tube. In the circuit, in addition to the voltage conversion function of ordinary transformer, it also ...
no data
As a professional power transformer manufacturer with 20 years of experiences, NINGBO VILLE ENTERPRISE is a combination of Transformer R&D center, production, sales and after sales service, possesses of strong technical strength and excellent manufacturing equipments, as well as modern Office facilities.
no data
PLEASE CONTACT US.
Contact person:  GREEN HSU
Contact number:  +86-13906684456 / +86-13867838839
WhatsApp:008613867838839 / 008613906684456

Add: Fl 6, No.C12 Building, Lane 299 Guanghua Rd, Ningbo R&D Park,Ningbo Hi-Tech Zone,China, 315040

Copyright © 2023 NINGBO VILLE ENTERPRISE CO.,LTD. - https://www.villeelectric.com/ | Sitemap
detect